Product Description
Company Info
Product Description
Property:
Characteristic: Lightweight, thin, strong adhesion, elastic, not water penetration, abrasion
Resistance, and good fireproof.
Applicable for: Covering for not readily ignitable deck of cabins
Consume amount: 23 kg/m2
Packing: Dry material (A component): 30kg/pack; Liquid(B component): 8kg/barrel
Storage: Cool and dry place, moisture-proof, the quality guarantee period is 6 months
Approval Certificate: ABS\BV\CCS\DNV\EC\GL \KR\LR\NK
Application Method:
1 Preparation prior to application
1.1 The steel decks fairing by hot working, all the embedded parts installation and welding that may interfere with the application of covering are to be finished beforehand.
1.2 The oils, water, paints, rusts, dusts on the steel plates are to be removed meanwhile the surface preparation is carried out according to the requirements of Grade P2 of CB3230 or Grade St2 of ISO8501-1.
2. Application Procedures
2.1 Firstly stir the dry materials(A component) evenly in agitator, and pour the liquid (B component) into the agitator according to the specified ratio of the dry materials and liquid, stirring it about 3 minutes, and then for application immediately.
2.2 Pour the mixed covering onto the cleaned steel deck, rub the covering back and forth with a trowel to moisture the steel decks sufficiently, then striking off the covering with wooden ruler.
2.3 Consolidating and leveling the covering surface with trowel, the roughness of the surface within 2 meters shall not be over 5mm. If the covering surface is a bit too hard for leveling, should spray some latex first and then level it.
2.4 After the covering application finished, it should be kept maintain for 1 to 2 days with spray a suitable amount of water or maintaining agent on its surface, and people may walk on it after it hardened.
2.5 After the covering is completely hardened (about 1 to 2 weeks), the floors should be adhered.
2.6 In the whole application and maintenance period, the environmental temperature should be a range of 0~35º C, cool-down measure is to be taken if the temperature is higher than 35º Cor heat preservation measure is to be taken if the temperature is lower than 0º C.
Attentions
The liquid (latex) shall be kept in cool place (0~35º C). If the surface of liquid has gels, the gels shall be removed, and the liquid can still be used.
rain showering or water dipping. If the dry material is obviously caked, it shall not be used.
The mixing ratio: A component: B component = 2: 1(Pack ratio).
Characteristic: Lightweight, thin, strong adhesion, elastic, not water penetration, abrasion
Resistance, and good fireproof.
Applicable for: Covering for not readily ignitable deck of cabins
Consume amount: 23 kg/m2
Packing: Dry material (A component): 30kg/pack; Liquid(B component): 8kg/barrel
Storage: Cool and dry place, moisture-proof, the quality guarantee period is 6 months
Approval Certificate: ABS\BV\CCS\DNV\EC\GL \KR\LR\NK
Application Method:
1 Preparation prior to application
1.1 The steel decks fairing by hot working, all the embedded parts installation and welding that may interfere with the application of covering are to be finished beforehand.
1.2 The oils, water, paints, rusts, dusts on the steel plates are to be removed meanwhile the surface preparation is carried out according to the requirements of Grade P2 of CB3230 or Grade St2 of ISO8501-1.
2. Application Procedures
2.1 Firstly stir the dry materials(A component) evenly in agitator, and pour the liquid (B component) into the agitator according to the specified ratio of the dry materials and liquid, stirring it about 3 minutes, and then for application immediately.
2.2 Pour the mixed covering onto the cleaned steel deck, rub the covering back and forth with a trowel to moisture the steel decks sufficiently, then striking off the covering with wooden ruler.
2.3 Consolidating and leveling the covering surface with trowel, the roughness of the surface within 2 meters shall not be over 5mm. If the covering surface is a bit too hard for leveling, should spray some latex first and then level it.
2.4 After the covering application finished, it should be kept maintain for 1 to 2 days with spray a suitable amount of water or maintaining agent on its surface, and people may walk on it after it hardened.
2.5 After the covering is completely hardened (about 1 to 2 weeks), the floors should be adhered.
2.6 In the whole application and maintenance period, the environmental temperature should be a range of 0~35º C, cool-down measure is to be taken if the temperature is higher than 35º Cor heat preservation measure is to be taken if the temperature is lower than 0º C.
Attentions
The liquid (latex) shall be kept in cool place (0~35º C). If the surface of liquid has gels, the gels shall be removed, and the liquid can still be used.
rain showering or water dipping. If the dry material is obviously caked, it shall not be used.
The mixing ratio: A component: B component = 2: 1(Pack ratio).
Address:
1188 Longxi North Road, Huzhou City Economy & Technology Development Zone, Huzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company, Other
Business Range:
Apparel & Accessories, Arts & Crafts, Bags, Cases & Boxes, Furniture, Textile
Main Products:
Silk, Textile, Bamboo Products, Pet Producs
Company Introduction:
Huzhou City Xiangshun Trading Co., Ltd established in 1997, which located in Economy and Technology Development Zone of Huzhou City of Zhejiang, China. The company sets up three subsidiary companies, including Huzhou Xiangshun impoert & export Co., Ltd, Huzhou Xiangshun clothing Co., Ltd, Xiangshun Ecology textile development Co., Ltd. The company now possesses more than 200 pieces of sewing machines and 300 employees, covering a floor space over 5000 square meters, the sales volume more than 2.5 million USD.
Our company mainly produces the 100% silk serial products (fabric, scarf, clothes, bedding); The company produces tent products(beach tent, tent bag, beache towel, sun hat); Logistics accessories(skate wheels, PVC Roller, universal skate wheels, flow rail, damping equipment); Bamboo fiber serial products(the bamboo wallpaper, bamboo fiber towel, bamboo place mats). Company largely exports our products to U. S. A, Europe, Australia, Japan, southeast Asia etc. Due to the top quality, competitive price and attractive service, our product has been deeply accepted by our customers. The Zhejiang Province high technology enterprise. The company through the ISO9001: 2000.
Our company mainly produces the 100% silk serial products (fabric, scarf, clothes, bedding); The company produces tent products(beach tent, tent bag, beache towel, sun hat); Logistics accessories(skate wheels, PVC Roller, universal skate wheels, flow rail, damping equipment); Bamboo fiber serial products(the bamboo wallpaper, bamboo fiber towel, bamboo place mats). Company largely exports our products to U. S. A, Europe, Australia, Japan, southeast Asia etc. Due to the top quality, competitive price and attractive service, our product has been deeply accepted by our customers. The Zhejiang Province high technology enterprise. The company through the ISO9001: 2000.
